Aria 360

2.4oz
CO2
Savings

Nitrile Foam Grip with Eco-Friendly Liner and Touchscreen Capabilities


Product Features

  • Genium is an eco friendly liner with 1/3 of the ingredients by weight that are sustainably sourced and that requires 30% less energy to be produced
  • Touchscreen capability on thumb and index finger
  • Anatomically designed with moisture wicking to deliver great comfort
  • Excellent grip in all conditions (dry, wet, oily)
  • Low particle shedding for sensitive applications
  • Super soft liner
  • Patented nitrile foam palm coating enhances protection
  • Sanitized antimicrobial finish provides extra freshness

Certifications

ANSI
A1 4 2
ANSI/ISEA 105:2016
A1 | 4 | 2
EN 388:2016 + A1:2018
EN 388:2016
+ A1:2018
4121A
EN 407:2020
EN 407:2020
X1XXXX
EN 388:2016
EN 388:2016
4121A





Further Information

Lightweight nitrile foam glove with an outstanding durability and grip, eco friendly liner and touch screen capabilities.

Available Options

Product Code Size Width Length Height Weight
SKG00022FB 6/XS 3.15 in 7.87 in 0.39 in 1.15 oz
SKG00022FD 7/S 3.15 in 8.27 in 0.39 in 1.2 oz
SKG00022FF 8/M 3.54 in 8.66 in 0.39 in 1.31 oz
SKG00022FH 9/L 3.54 in 9.06 in 0.39 in 1.41 oz
SKG00022FJ 10/XL 3.54 in 9.45 in 0.39 in 15.17 oz
SKG00022FL 11/XXL 3.94 in 9.84 in 0.39 in 1.55 oz

Product Specifics

CoatingFoam Nitrile
Coating TypePalm Coated
Construction TypeKnitted
Cuff StyleElasticated Knit Wrist
Gauge15
LinerGenium, Nylon, Spandex
SeriesAria
Reusable

Certifications

ANSI/ISEA 105:2016A1, 4, 2
EN 388:2016 + A1:20184121A
EN 407:2020X1XXXX
EN 420:2003 + A1:2009
EN 388:20164121A

ANSI/ISEA 105:2016

ValueA1, 4, 2
Cut Resistance
A1(A1-A9)
Abrasion Resistance
4(1-6)
Puncture Resistance
2(1-5)

EN 388:2016 + A1:2018

Value4121A
Abrasion Resistance
4(1-4)
Cut Resistance (Coup Test)
1(1-5)
Tearing Resistance
2(1-4)
Puncture Resistance
1(1-4)
Cut Resistance (TDM Test)
A(A-F)

EN 407:2020

ValueX1XXXX
Contact Heat Resistance
1(1-4)

EN 388:2016

Value4121A
Abrasion Resistance
4(1-4)
Cut Resistance (Coup Test)
1(1-5)
Tearing Resistance
2(1-4)
Puncture Resistance
1(1-4)
Cut Resistance (TDM Test)
A(A-F)

Options

Selected Option Specifics

SKUSKG00022FB
Size6/XS
Main ColorGray
Secondary ColorBlack
SKUSKG00022FD
Size7/S
Main ColorGray
Secondary ColorBlack
SKUSKG00022FF
Size8/M
Main ColorGray
Secondary ColorBlack
SKUSKG00022FH
Size9/L
Main ColorGray
Secondary ColorBlack
SKUSKG00022FJ
Size10/XL
Main ColorGray
Secondary ColorBlack
SKUSKG00022FL
Size11/XXL
Main ColorGray
Secondary ColorBlack

Ordering Information

Items per Pack10
Case Quantity120
Packs Per Case12
Items per Pack10
Case Quantity120
Packs Per Case12
Items per Pack10
Case Quantity120
Packs Per Case12
Items per Pack10
Case Quantity120
Packs Per Case12
Items per Pack10
Case Quantity120
Packs Per Case12
Items per Pack10
Case Quantity120
Packs Per Case12

Packaging

Unit Height0.39in
Unit Length7.87in
Unit Width3.15in
Pack Height3.94in
Pack Length7.87in
Pack Width3.15in
Weight1.15oz
Pack Weight0.75lb
Case Height11.02in
Case Length14.96in
Case Width11.42in
Case Weight8.6lb
Unit Height0.39in
Unit Length8.27in
Unit Width3.15in
Pack Height3.94in
Pack Length8.27in
Pack Width3.15in
Weight1.2oz
Pack Weight0.97lb
Case Height11.02in
Case Length14.96in
Case Width11.42in
Case Weight9.04lb
Unit Height0.39in
Unit Length8.66in
Unit Width3.54in
Pack Height3.94in
Pack Length8.66in
Pack Width3.54in
Weight1.31oz
Pack Weight0.84lb
Case Height11.02in
Case Length14.96in
Case Width11.42in
Case Weight9.7lb
Unit Height0.39in
Unit Length9.06in
Unit Width3.54in
Pack Height0.39in
Pack Length9.06in
Pack Width0.35in
Weight1.41oz
Pack Weight0.9lb
Case Height11.02in
Case Length14.96in
Case Width11.42in
Case Weight10.58lb
Unit Height0.39in
Unit Length9.45in
Unit Width3.54in
Pack Height3.94in
Pack Length9.45in
Pack Width3.54in
Weight15.17oz
Pack Weight0.97lb
Case Height11.02in
Case Length14.96in
Case Width11.42in
Case Weight11.25lb
Unit Height0.39in
Unit Length9.84in
Unit Width3.94in
Pack Height3.94in
Pack Length9.84in
Pack Width3.94in
Weight1.55oz
Pack Weight0.99lb
Case Height11.02in
Case Length14.96in
Case Width11.42in
Case Weight11.69lb
Disposal
When stored as recommended, the gloves will not suffer a change in mechanical properties for up to three years from the date of manufacture. Service life cannot be specified and depends on the application and it is the responsibility of user to ascertain suitability of the glove for its intended use.
Cleaning
Check that the glove does not present holes, cracks, tears, colour change…., and discard any glove presenting such defects. Gloves should not be left in contaminated condition if reuse is intended in which case gloves should be cleaned as far as possible. To clean, wipe with a damp cloth.
Lifetime
Service life depends on the glove application and therefore cannot be specified. It is the responsibility of the user to ensure the glove is suitable for its intended use.
Notes
CAUTION! Avoid using near moving machinery due to entanglement hazard. PLEASE NOTE The results of the physical tests should help in glove selection, however it must be understood that actual conditions of use cannot be simulated and it is the responsibility of the end user and not the manufacturer to determine glove suitability for the intended use.
Storage
Ideally stored in dry conditions between 10°C and 30°C in the original packaging and sheltered from direct light. Do not exceed 40°C.
Recommendations for use
Gloves are designed to protect against intermediate risk which may include General material handling, assembly and maintenance glove providing protection against slip, dirt and moderate mechanical workload. Suitability of the product is to be ascertained per each particular work application as part of the end users risk assessment program. Use protective gloves only for the intended use and the right size. Check for damage before use, Never use damage glove.
Recommendations for use
Gloves are designed to protect against intermediate risk which may include General material handling, assembly and maintenance glove providing protection against slip, dirt and moderate mechanical workload. Suitability of the product is to be ascertained per each particular work application as part of the end users risk assessment program. Use protective gloves only for the intended use and the right size. Check for damage before use, Never use damage glove.
Recommendations for use
Gloves are designed to protect against intermediate risk which may include General material handling, assembly and maintenance glove providing protection against slip, dirt and moderate mechanical workload. Suitability of the product is to be ascertained per each particular work application as part of the end users risk assessment program. Use protective gloves only for the intended use and the right size. Check for damage before use, Never use damage glove.
Recommendations for use
Gloves are designed to protect against intermediate risk which may include General material handling, assembly and maintenance glove providing protection against slip, dirt and moderate mechanical workload. Suitability of the product is to be ascertained per each particular work application as part of the end users risk assessment program. Use protective gloves only for the intended use and the right size. Check for damage before use, Never use damage glove.
Recommendations for use
Gloves are designed to protect against intermediate risk which may include General material handling, assembly and maintenance glove providing protection against slip, dirt and moderate mechanical workload. Suitability of the product is to be ascertained per each particular work application as part of the end users risk assessment program. Use protective gloves only for the intended use and the right size. Check for damage before use, Never use damage glove.
Recommendations for use
Gloves are designed to protect against intermediate risk which may include General material handling, assembly and maintenance glove providing protection against slip, dirt and moderate mechanical workload. Suitability of the product is to be ascertained per each particular work application as part of the end users risk assessment program. Use protective gloves only for the intended use and the right size. Check for damage before use, Never use damage glove.

You may also like

Eco Iridium Glove
Eco Certified

Eco Iridium

High Cut Resistant Glove with Recycled Polyester Liner and Nitrile Foam Coating
ANSI/ISEA 105:2016:A5, X, X | EN 388:2016 + A1:2018:4X43E | EN 21420:2020
View Product
Eco Nickel Glove
Eco Certified

Eco Nickel

General Handling Glove with PU Coating, Made with Recycled Polyester
ANSI/ISEA 105:2016:X, 4, 2 | EN 388:2016 + A1:2018:3131X | EN 21420:2020
View Product
TRC715 Tricolore Glove
Eco Certified

TRC715

Recycled Polyester, HPPE and Steel Fibre Liner with Nitrile Foam Coating
ANSI/ISEA 105:2016:A5, X, X | EN 388:2016 + A1:2018:4X43E | EN 420:2003 + A1:2009 | EN 388:2016:4X43E
View Product
Radius EW151 Glove

Radius EW151

Cut Resistant, Thermal, Water Repellent Fully Coated Latex Glove
ANSI/ISEA 105:2016:A5, X, X | EN 388:2016 + A1:2018:3X33D | EN 511:X 1 X | EN 21420:2020
View Product
Aria 360
Aria 360 PFT Glove

Enquiry for: Aria 360

🇺🇸
Compare 0
View Comparison